The incubator from Memmert: for controlled outdoor conditions in the laboratory

The incubator from Memmert: for controlled outdoor conditions in the laboratory

Incubators are used to store and test materials and samples under constant temperature conditions. Therefore, it is particularly important to rely on a precise and safe device. An incubator from Memmert GmbH not only meets these criteria, but is also distinguished by many model variants and innovative technologies. You can find out the most important information about the Memmert incubator and our corresponding range at MedSolut here.

Areas of application of the incubator from Memmert

Incubators, which are also referred to as "incubators", are suitable for a variety of different applications. The load inside the device is heated or cooled to a predefined temperature at atmospheric pressure, which is why a high temperature constancy and the lowest tolerances for fluctuations are elementary. With a manufacturer's incubator, these criteria are fully met. Typically, drying ovens and incubators from Memmert are used for research, material and component tests, and cultivation processes. This is one of the reasons why they can be found, for example, in industry, in food production and food analysis, in pharmacy and in medicine . Common applications include incubating cell cultures, cultivating bacteria, performing stability tests (think cosmetics and food) and keeping samples, plates, culture media, infusion solutions and materials warm and at the right temperature. The Memmert cooled incubator is used for cooling processes in the laboratory.

Your incubator: Discover Memmert incubators at MedSolut

Not all incubators are the same - depending on the requirements of the load, different functions and temperatures are used in the device. For this reason, the brand manufacturer relies on different model series, which include CO2 incubators and Memmert refrigerated incubators. This not only allows samples and materials to be stored safely and consistently, but also simulates different conditions. In our range at MedSolut, you will find the following models of Memmert incubators in particular: The model series ICO includes CO incubators in which, in addition to the constant temperature, the oxygen and carbon dioxide concentration in the interior can also be defined. The setting range in each case is between 18°C and 50°C as well as 0% to 20% CO2 and 1% to 20% O, respectively. Humidity can also be set between 40 and 97 rh. Thanks to the battery-buffered ControlCOCKPIT, the CO2 supply remains guaranteed even in the event of a power failure. For example, these models from the manufacturer offer the best functions for protecting cell cultures and tissue samples.

Compressor-cooled incubator

In ramp operation with rapid temperature changes, a Memmert incubator is needed that works quickly and reliably - while remaining powerful and highly precise. For such applications, the model series ICPeco and ICP were designed for such applications. The cooled incubator operates with compressor-controlled cooling in the range from -12°C to 60°C. This permanently prevents icing of the cooling unit and sample drying. This permanently prevents icing of the cooling unit and sample drying. Thanks to their rapid adaptation to changing conditions, Memmert cooled incubators are used primarily for biological, zoological and food processes. They can also be found in the pharmaceutical industry for cultivation and storage.

Storage-cooled incubator

The incubators of the series I and IPS. These classic storage-cooled incubators can be operated in a temperature range up to 80°C. They are also especially suitable for incubating live cultures at 37°C and for particularly gentle heating of the load. The air exchange rates and air flap settings can be easily controlled electronically.

Peltier-cooled incubator

In the IPPeco-series from Memmert comprises the Peltier-cooled incubators. These incubators are equipped with the manufacturer's innovative and sophisticated Advanced Peltier Technology, which makes them energy-efficient, powerful, quiet and low-vibration. This means that microbiology laboratories can also be safely equipped. Common applications include microbial count determinations, force tests and microbiological examinations. The Peltier-cooled incubators cover a temperature range between 0°C and 70°C and are equipped with a fan for fast energy transport under optimal temperature distribution.

Selection criteria for buying your Memmert incubator

In order to be able to adapt the Memmert incubator to your needs, you should pay attention to a few important criteria when purchasing. These primarily include the setting options, model variants and temperature ranges. The products from Memmert GmbH are characterized in particular by the following advantages:

• high energy efficiency: the energy efficiency of a Memmert incubator outperforms other manufacturers by up to 70%.

• easy cleaning due to rounded corners and high-quality stainless steel

• offers optimum protection for cell cultures, bacterial cultures and tissue cultures

• high performance

• choice of different sizes for practically all models, so there is enough space for your load

• modern equipment and innovative technologies (e.g. Ethernet interface for data transfer)

• fast and easy manufacturer's service for maintenance, repair and instruction for device use

• Very good price-performance ratio

Choose from various equipment options for your Memmert incubator

One of the special features of the manufacturer's incubators is that they are produced with different equipment and sizes. This facilitates the selection for your own application purpose - so you do not have to make any compromises, but receive a product that is exactly right for you. A Memmert cooled incubator offers the following equipment, for example:

• ICO: 4 items between 56 and 241 l interior volume, FDA-compliant data logging, active humidity control, CO2 and O2 setting ranges.

• IPPeco: 9 model sizes between 32 and 2,140 l interior volume, fully insulated stainless steel door, Peltier fan, Advanced Peltier Technology.

• I: 8 model sizes between 32 and 749 l interior volume, natural convection (N) or forced air circulation (F), double doors, 4-hour sterilization routine.

• ICPeco: 4 model sizes between 108 and 749 l interior volume, double doors, advanced ventilation technology, defrost function.

• Single or twin display: items with the model suffix "plus" also have a twin display, which increases convenience and facilitates the control of complex processes. In addition, the control and logging software AtmoCONTROL is also available for these model variants.

Your incubator from Memmert: innovative technology

Is from Memmert GmbH is a traditional company with more than 65 years of experience in the production of climatic chambers and waterbaths. The manufacturer is already in its third generation and produces the appliances "made in Germany" at two production sites in southern Germany. In the meantime, the company is one of the absolute innovation leaders on the market, which is not least due to the modern temperature control and control technology. At the same time, the manufacturer impresses with excellent service and the possibility of individualization with the help of myAtmoSAFE. This manufacturer can also be seen from an entrepreneurial point of view - a primary focus is on sustainability and social commitment.

Find your new incubator from Memmert at MedSolut

An incubator from Memmert GmbH is not only characterized by a high quality of workmanship, precise and energy-efficient operation, and compliance with the highest safety standards, but also convinces with many equipment options and a philosophy with tradition. Anyone who decides in favor of such an appliance has made a good choice. To find the best Memmert incubator for your needs, our team will be happy to provide you with advice and comprehensive service. Simply contact us on +49 30 209 657 900 or send us an e-mail to info@medsolut.com - we look forward to helping you with your selection!