Picture similar

Memmert CO2 incubator ICO

SKU: MEM_6016
GTIN: 4064343404235
Category: Incubators
Manufacturers: Memmert GmbH & Co. KG

Volume

from

4.774,70 €

excl. 19% VAT , plus (Sperrgut)

MSRP Manufacturer: 5.026,00 €

This item has variations. Please select the requested variation.

24/7 Service
Certified Consulting
Insured shipping
Buyer protection

Secure payment

Discover reliable incubators: The Memmert ICO

The ICO offers high-end functions for the protection of cell cultures, bacterial cultures and tissue cultures. Temperature control can be carried out extremely precisely with the sophisticated control system, while at the same time quickly reaching the set temperature without overshooting.

Safety was also a focus during the development of this incubator series: the rounded stainless steel interior in conjunction with the 180 °C sterilization program ensure even easier cleaning and sterility. Please do not hesitate to contact us if you have any questions about Memmert incubators.

Sophisticated control technology

In the models of the Memmert ICO series, alarm messages are sent directly to the cell phone, guaranteeing the safety of the load. Another safety feature is the battery-buffered ControlCOCKPIT, which ensures that CO2 control is not interrupted even in the event of a power failure.

The unit is characterized by its intuitive and user-friendly operating concept via the Memmert ControlCOCKPIT. With the AtmoCONTROL software, you can carry out a wide range of programming and documentation via the integrated data logger with 10-year memory capacity. With fail-safe and FDA-compliant data logging, you can always trace temperature, CO2, O2, humidity and door opening.

In addition, advanced communication technologies and interfaces make this model convenient to monitor and program remotely.

High-quality materials and first-class functionality

The proven structured Memmert stainless steel used here for the interior and exterior housing is particularly durable, scratch-resistant, easy to clean and hygienic at the same time. Precise and homogeneous temperature control is ensured by a product-specific heating concept.

With the worldwide Memmert service for spare parts, maintenance, repair, commissioning, software instruction, customer training and IQ/OQ/PQ qualification, you can rely on reliable operation with a long product service life.

Active humidity control reduces evaporation in the interior to a minimum and recovery times after opening the door are kept short. Inside the chamber, all six sides as well as the inner glass door are heated, preventing dangerous condensate formation and thus ensuring maximum protection of cell and tissue cultures. Turbulence-free interior ventilation ensures a consistently homogeneous atmosphere.

Quick maintenance is ensured by the hinged orifice box and two gas connections with quick coupling for automatic gas cylinder switching.

Essential technical data of the ICO150 CO2 incubator

The products of this series are available in four different model sizes with

56 liters
107 liters
156 liters
241 lit ers interior volume available.

Based on the different volumes and other technical data, you can find out which model fits best in your workspace.

Temperature and heating concept

The temperature setting accuracy is 0.1 °C - this enables you to calibrate your individual desired temperature with pinpoint accuracy at any time. The setting temperature range for all model variants is +18 °C to +50 °C.

Two temperature sensors ensure mutual monitoring and function takeover in the event of a fault. The heating concept is specially designed to prevent condensation and consists of large-area multifunctional all-round heating on six sides and door and rear wall heating.

Humidity and CO2 control

The relative humidity is limited by a Peltier element in the interior to 93 % rh +/- 2.5 %, with a setting accuracy of 0.5 % rh. The setting range of the active humidity control is 40 to 97 % rh and rh-Off.

The digitalized, electronic control of the oxygen concentration is achieved by introducing nitrogen with a setting range of 1 % to 20 % O² and 0 to 20 % CO² with a setting accuracy of 0.1%.

Reliable control technology

The ControlCOCKPIT with TwinDisplay contains an adaptive multifunctional PID microprocessor controller with two high-resolution TFT color displays.

Language settings can be made in German, English, Spanish, French, Polish, Czech and Hungarian. The timer with digital reverse clock can be set from one minute to 99 days.

With the SetpointWAIT function, the process time is not started until the setpoint temperature is reached. With the calibration function, three freely selectable temperature values can be set.

The temperature can be set in either Celsius or Fahrenheit. In addition, parameters for program run time, time zones and summer or winter time can be set.

Communication

The integrated logging function ensures that the program sequence is saved - even in the event of a power failure.

With the help of the AtmoCONTROL software, programming as well as managing and transferring the data logger can be carried out via an Ethernet interface or a USB port.

Safety

The Memmert AutoSAFETY offers an additional integrated over- and under-temperature monitoring ("ASF"). This automatically follows the setpoint at freely selectable intervals. The visual and audible alarm is triggered when the temperature exceeds or falls below the setpoint.

The cooling function is switched off automatically when the temperature falls below the setpoint. The integrated self-diagnosis system is used to find errors in the temperature and CO2 control.

Standard scope of delivery

The standard accessories include a membrane filter to keep out impurities and pollutants.

The unit is equipped with two stainless steel perforated plates including a stainless steel water tray as shelves. Built-in is a fully insulated stainless steel door with 2-point locking (compression door latch). The inner glass door has an 8 mm diameter opening for gas sampling.

Interior

The stainless steel interior of this model has a volume of 156 l. The dimensions are 560 mm x 700 mm x 400 mm in width, height and depth (WxHxD) minus 35 mm in depth for the fan. A total of 10 shelves can be placed in the interior, with a maximum load of 15 kg per shelf and 120 kg per unit.

Housing

The structural stainless steel case measures 719 mm x 1070 mm x 591 mm in width, height and depth (WxHxD). In addition, there is 56 mm in depth for the door handle.

A fully galvanized sheet steel back panel is attached to the rear of the housing. The net weight (without packaging) is approx. 90 kg.

Do you have further questions? We will be happy to advise you!

Our trained MedSolut team will ensure that you receive the best materials for your laboratory. Do you have any questions about our different designs, their modes of operation or their manufacturers?

We will be happy to advise you and can be reached at any time by phone at +49 30 2096579 00 or by e-mail at info@medsolut.com. We are looking forward to your contact!

Load max.:	51 - 100 kg, 101 - 150 kg
Width outside (incubators,...):	559 mm, 719 mm, 759 mm
Width inside (incubators,...):	400 mm, 560 mm, 600 mm
Maximum temperature (heat):	+ 50 °C
Height outside (incubators,...):	795 mm, 850 mm, 1070 mm, 1180 mm
Height inside (incubators,...):	425 mm, 480 mm, 700 mm, 810 mm
Incubator model:	CO2 incubator
Interior volume:	51 - 100 l, 101 - 200 l, 201 - 300 l
Cabinet type:	incubator
Depth outside (incubators,...):	521 mm, 591 mm, 691 mm
Depth inside (incubators,...):	330 mm, 400 mm, 500 mm

. . . . . when the water tray is folded and inserted. .

Memmert CO2 incubator ICO, model size	50	105	150	240
Stainless steel interior
Volume approx (l)	56	107	156	241
Width (mm)	400	560	560	600
height (mm)	425	480	700	810
Depth (mm) (minus 35 mm for lüfter)	330	400	400	500
Max. Number of gratings/perforated plates	5	6	10	12
Max. Load per grating/perforated plate (kg)	15	15	15	15
Max. Load per unit (kg)	75	90	120	140
Structural stainless steel housing
Width (mm)	559	719	719	759
Height (varies due to adjustable feet) (mm)	795	850	1070	1180
Depth (mm) (without Türgriff), Türgriff + 56 mm	521	591	591	691
Fully insulated heated stainless steel	yes	yes	yes	yes
Additional heated inner glass	yes	yes	yes	yes
Standard accessories
Stainless steel perforated plates (quantity)	1	2	2	2
Stainless steel water bowl (quantity) (removed with option K7)	1	1	1	1
Factory calibration certificate (measuring point middle of usable space) für +37 °C, 5 % CO2 für standard device	yes	yes	yes	yes
Factory calibration certificate +37 °C, 5 % CO2, 90 % rh and 10 % O2 (subject to option K7 and option T6); standard equipment on unitsät with O2 control	yes	yes	yes	yes
Factory calibration certificate +37 °C, 5 % CO2 and 90 % rh (conditional option K7); Standard equipment for unitsät with active humidity control	yes	yes	yes	yes
CO2 connection kit, hose with connection coupling and hose clamp	yes	yes	yes	yes
Background sterilization program (without removing sensors), Humidity and CO2 sensor can be left in the cabinet for sterilization	60 minutes at 180 °C	like 50	like 50	like 50
Membrane filter (to remove impurities and pollutants, all input gases are filtered through membrane filters before entering the chamber)	yes	yes	yes	yes
temperature
Working temperature range (°C)	Minimum 5 über room- temperature to +50	like 50	like 50	like 50
Setting temperature range (°C)	+18 to +50	like 50	like 50	like 50
Setting accuracy (°C)	0.1	0.1	0.1	0.1
Temporal temperature variation at 37 °C (K)	± 0.1	± 0.1	± 0.1	± 0.1
Remote temperature deviation at 37 °C (K)	± 0.3	± 0.3	± 0.3	± 0.3
Humidity
Humidity limitation by Peltier element; limits the value of the relative humidity in the interior to 93 % rh ± 2.5 %	yes	yes	yes	yes
Setting range active humidity control (with option K7) (%r h)	40 to 97 and rh-Off	as 50	like 50	like 50
Adjustment accuracy (% rh)	0.5	0.5	0.5	0.5
CO2/O2
Digitalized, electronic CO2 control with dual-beam NDIR measurement method, self-diagnostic system and audible error indication, barometric air pressure compensation	yes	yes	yes	yes
Setting range CO2 (% CO2)	0 to 20	0 to 20	0 to 20	0 to 20
Time variation CO2 (% CO2)	± 0.2	± 0.2	± 0.2	± 0.2
Setting accuracy CO2 (% CO2)	0.1	0.1	0.1	0.1
Adjustment range O2 (% O2)	1 to 20	1 to 20	1 to 20	1 to 20
Adjustment accuracy O2 (% O2)
Power consumption at 230/115 V, 50/60 Hz approx. (W)	1100	1300	1500	1650
Weight
Net weight (kg)	55	75	90	110
Gross weight (in carton) (kg)	74	100	116	145
Width (mm)	730	800	800	840
height (mm)	950	1030	1250	1360
Depth (mm)	640	800	800	900

Toller Kundenservice und schnelle Beantwortung aller Fragen. Wir benötigten eine komplette Laborausstattung für unseren neuen Standort. Das Team von MedSolut hat alles zu unserer Zufriedenheit geregelt. Kunde

There are no reviews yet.