Buy Memmert Peltier-cooled incubator IPP750ecoplus Online at a Good Price

All-rounder in research and laboratory: the IPPeco from Memmert.

The Memmert IPPeco Peltier-cooled incubator works with state-of-the-art eco-standards for cultivation under room temperature. With best values for heating, cooling and recovery times, it is enormously efficient and considerably more energy-saving compared to climatic chambers with a compressor. At the same time, an absolutely homogeneous distribution of the temperature is ensured. The unit also operates continuously and proves to be reliable and fail-safe for many years.

The following information will show you not only the important features, data and functions, but also specifics about the technologies used. If you would like advice on this model and other details, we will of course be happy to assist you in word and deed.

Optimal all-rounder for laboratory and medicine

The IPPeco cooled incubator from Memmert is one of the most energy-efficient and at the same time most powerful appliances of its kind. The reason for this is Memmert's Advances Peltier Technology, which significantly reduces heating, cooling and recovery times. This allows operating costs to be saved, sample quality requirements to be ensured and process times in the microbiology laboratory to be significantly reduced.

With this instrument, you can carry out typical applications such as microbiological tests, microbial count determination, cultivation above and below room temperature, force test beer stability or shelf life tests of dairy products.

With Memmert Advanced Peltier Technology, the IPPeco cooled incubator enables highly sensitive temperature control with minimal control fluctuations, ensuring excellent temperature homogeneity . The risk of sample dehydration is minimized due to the interior space being completely sealed off from the environment.

Another advantage is that condensation during the cooling process does not occur in the working chamber, but outside on the Peltier element. Without a compressor, the IPPeco cooling incubator is quiet, space-saving and vibration-free.

Discover the special features of the series

The model is available in a total of 9 different model sizes or versions with an interior volume of 32 to 2140 liters. There are 2 model variants to choose from: SingleDISPLAY and TwinDISPLAY. The material used for the housing and interior consists almost exclusively of durable and easy-to-clean stainless steel.

The temperature range of this model is 0 °C to +70 °C. Contamination and temperature fluctuations are prevented with the fully insulated stainless steel door with glass cut-out. The product-specific heating concept ensures precise, homogeneous and energy-efficient temperature control.

The IPPeco is also characterized by its intuitive and user-friendly operating concept. There are numerous options for comprehensive programming and documentation with the AtmoControl software, the available interfaces and an integrated data logger.

Technical details at a glance

In addition to the special functions of the product series, the technical information about the product is also highly relevant if you want to decide on the optimal device for your area of application. Accordingly, you will find an overview of the technical data below.

Temperature range & settings

The setting accuracy of the temperature is 0.1 °C. The setting temperature range for all model variants is 0 °C to +70 °C. The temperature sensor ensures monitoring and function takeover in the event of a fault. Convection takes place with forced internal air circulation by a Peltier circulating air fan.

The heating concept is based on a Peltier heating-cooling system integrated in the rear panel (energy-saving heat pump principle). And the temperature of this model can be set in both Celsius or Fahrenheit. In addition, parameters for program run time, time zones, and summer or winter time can be set.

Control and timer

The ControlCOCKPIT - optionally with single or twin display - contains an adaptive multifunctional PID microprocessor controller with high-resolution TFT color displays. Language settings can be made in German, English, Spanish, French, Polish, Czech as well as Hungarian. The integrated timer with digital backward clock can be set from one minute to 99 days.

With the SetpointWAIT function, the process time is not started until the setpoint temperature is reached. With the calibration function, three freely selectable temperature values can be set.

Communication

The integrated logging function ensures that the program sequence is saved - even in the event of a power failure. With the help of the AtmoCONTROL software, programming as well as managing and transferring the data logger can be carried out via an Ethernet interface or a USB port.

Safety

The temperature is monitored by a mechanical temperature limiter TB. A self-diagnosis system is used for error detection.

Standard scope of delivery

The unit is equipped with two stainless steel grid posts (electropolished) as plug-in units. A fully insulated stainless steel door with 2-point locking (compression door lock) and interior glass door is installed.

Interior and load

The interior of this unit is made of high quality stainless steel and has a volume of 1060 liters. The dimensions in width, height and depth (WxHxD) are 1040 mm x 1200 mm x 850 mm minus 32 mm for fan or Peltier in depth. The device has the optimal size to be placed in small to medium sized laboratories and work areas. A total of 14 shelves can be placed inside, with a maximum load of 20 kg per shelf and 200 kg per unit.

Housing and weight

The structural stainless steel housing measures 1224 mm x 1720 mm x 1005 mm in width, height and depth (W x H x D). In addition, there are 56 mm in depth for the door handle and 111 mm for the Peltier element.

A fully galvanized sheet steel back panel is attached to the rear of the housing. The unit is on casters and is mobile and lockable. The net weight (without packaging) is approx. 284 kg.

Do you have further questions? We will be happy to advise you!

Our first-class team of consultants wants you to get the right Memmert appliances for your needs. Do you have any questions about the versatile appliances, their features or the respective manufacturers?

We look forward to hearing from you and will be happy to advise you. You can reach us by phone at +49 30 2096579 00 or by e-mail at info@medsolut.com.

Load max.:	151 - 200 kg
Width outside (incubators,...):	1224 mm
Width inside (incubators,...):	1040 mm
Maximum temperature (heat):	+ 70 °C
Height outside (incubators,...):	1720 mm
Height inside (incubators,...):	1200 mm
Incubator model:	incubator, cooling incubator
Interior volume:	701 - 800 l
Air convestion (incubators, ...):	forced
Cabinet type:	incubator
Depth outside (incubators,...):	755 mm
Depth inside (incubators,...):	600 mm
Lowest temperature (cooling):	0 °C
Shipping weight:	301,00 kg
Item weight:	230,00 kg

Memmert Peltier incubator IPPeco, model size	30	55	110	260	410	750	1060	1400	2200
Stainless steel interior
Volume approx (l)	32	53	108	256	384	749	1060	1360	2140
Width (mm)	400	400	560	640	640	1040	1040	1250	1972
Height (mm)	320	400	480	800	800	1200	1200	1450	1450
Depth (mm) (less 10 mm (sizes 30 and 55), less 32 mm (sizes 110 to 2200) for Lüfter Peltier (mm)	250	330	400	500	500	600	850	750	750
Max. Number of grids/perforated plates	3	4	5	9	9	14	14	28	42
Max. Load per grating/perforated plate (kg)	20	20	20	20	20	30	20	30	30
Max. Load per unit (kg)	60	80	150	200	200	200	200	250	300
Max. Load per insertion drip tray (kg)	1.5	1.5	3	4	4	8	8	-	-
Max. Load per bottom drip tray (kg)	1.5	1.5	3	4	4	8	8	-	-
Structural stainless steel case
Width (mm)	585	585	745	824	824	1224	1224	1435	2157
Height (mm) (Size 410, 750, 1060 with rollers)	704	784	864	1183	1183	1720	1720	1913	1913
Depth (mm) (without Tür handle), Tür handle + 56 mm	434	514	555	655	655	755	1005	905	905
Standard accessories
Stainless steel gratings, electropolished (quantity)	1	1	2	2	2	2	2	4	6
Standard factory calibration certificate (Measuring point middle of usable space) (°C)	+10 and +37	as 30	like 30	like 30	like 30	like 30	like 30	+25 and +40	like 1400
temperature
Working temperature range without light (°C)	0 (at least 20 below room temperature) to +70	like 30	like 30	like 30	like 30	like 30	like 30	+15 (at least 10 below room temperature) to +60	like 1400
Working temperature range with light (°C)	-	-	+10 to +40	+10 to +40	+10 to +40	+10 to +40	-	-	-
Setting temperature range (°C)	0 to +70	like 30	like 30	like 30	like 30	like 30	like 30	+15 to +60	like 1400
Adjustment accuracy (°C)	0.1	0.1	0.1	0.1	0.1	0.1	0.1	0.1	0.1
Power consumption at 230/115 V, 50/60 Hz approx. (W)	140	275	320	600	600	1200	1200	1600	1800
Peltier elements in the Rück wall (number)	1	1	1	2	2	4	4	5	6
weight
Net weight (kg)	40	52	78	114	157	230	255	450	493
Gross weight (kg)	56	71	103	165	210	301	419	639	730

Toller Kundenservice und schnelle Beantwortung aller Fragen. Wir benötigten eine komplette Laborausstattung für unseren neuen Standort. Das Team von MedSolut hat alles zu unserer Zufriedenheit geregelt. Kunde

There are no reviews yet.

Memmert Peltier-cooled incubator IPPeco