BINDER FED 400 heating chamber with forced air circulation
The BINDER FED 400 heating oven with forced convection is a versatile drying oven that can be used in laboratories and medical facilities. It is ideal for cultivating microorganisms, bacteria and animal cultures as well as for various incubation and development processes. Thanks to its precise temperature and humidity control, the FED 400 is also ideal for studying cell behavior and growth. Compared to similar products such as the BINDER ED 400 drying oven with natural air circulation, the FED 400 offers forced air circulation, which enables a more even temperature distribution.
Technical data and equipment
The BINDER FED 400 is equipped with a wide range of functions that make it an indispensable piece of equipment in any laboratory:
-
Oven type: Drying oven
-
Maximum load: 51 - 100 kg
-
Internal volume: 301 - 400 l
-
Maximum temperature: +300 °C
-
Internal dimensions: Width 1000 mm, height 800 mm, depth 500 mm
-
External dimensions: Width 1235 mm, height 1025 mm, depth 765 mm
-
Energy consumption: 520 W at 70 °C, 1200 W at 150 °C, 2340 W at 300 °C
-
IP protection class: IP 20 according to EN 60529
-
Rated voltage: 400 V, 3 N~, 50/60 Hz
-
Rated power: 3.4 kW
The FED 400 has a wide range of control and monitoring functions, including
- An easy-to-use controller for simultaneous display of all relevant parameters
- An electronic chart recorder and various graphical display options for the process parameters
- A real-time clock and an electronic fault auto-diagnostic system with visual and audible alarms
- An Ethernet interface for the APT-COM™ DataControlSystem communication software
- Several optional stainless steel slide-in units and a BINDER test certificate
Certifications and standards
The BINDER FED 400 meets the requirements of DIN 58947 for hot air sterilization at 180 °C. This ensures safe sterilization of laboratory utensils and samples in accordance with the relevant standards.
Application examples
The BINDER FED 400 heating chamber is ideal for a wide range of laboratory and medical applications:
-
Cultivation of microorganisms: the FED 400 provides optimum conditions for the growth and examination of bacterial and fungal cultures.
-
Incubation and development processes: Thanks to the precise temperature control, the cabinet is ideal for the incubation of eggs and the development of insect larvae.
-
Cell culture: The FED 400 enables the investigation of cell behavior and cell growth under controlled conditions.
-
Material tests: The chamber can also be used for drying and curing materials, similar to the BINDER FP 400 material test chamber.
FAQs
How is the temperature in the BINDER FED 400 controlled?
The temperature in the BINDER FED 400 is controlled by a precise regulator, which ensures an even distribution of heat in the interior. The forced air circulation ensures fast and even heating.
What safety functions does the BINDER FED 400 offer?
The FED 400 is equipped with an electronic fault auto-diagnosis system that triggers visual and acoustic alarms. It also has a temperature selector monitor with visual and audible temperature alarm.
Can the BINDER FED 400 be used for sterilization?
Yes, the BINDER FED 400 meets the requirements of DIN 58947 for hot air sterilization at 180 °C and is therefore suitable for the sterilization of laboratory utensils and samples.
Conclusion
The BINDER FED 400 heating chamber with forced convection is a versatile and reliable appliance for use in laboratories and medical facilities. With its precise temperature and humidity control, extensive safety functions and ease of use, it offers optimum conditions for a wide range of applications. Similar products such as the BINDER BF 400 incubator or the BINDER FP 400 material test chamber also offer excellent performance and can be a good alternative depending on specific requirements.
| Load max.: |
51 - 100 kg |
| Width outside (incubators,...): |
1235 mm |
| Width inside (incubators,...): |
1000 mm |
| Maximum temperature (heat): |
+ 300 °C |
| Height outside (incubators,...): |
1025 mm |
| Height inside (incubators,...): |
800 mm |
| Interior volume: |
301 - 400 l |
| Cabinet type: |
heating oven |
| Depth outside (incubators,...): |
765 mm |
| Depth inside (incubators,...): |
500 mm |
| BINDER Heating chamber |
FED 400 |
| Exterior dimensions |
|
| Width (mm) |
1235 |
| Height (incl. feet) (mm) |
1025 |
| Depth (mm) |
765 |
| Plus door handle, I-panel, connection (mm) |
105 |
| Wall clearance, rear (mm) |
100 |
| Wall clearance, side (mm) |
160 |
| Exhaust duct (outer Ø mm) |
52 |
| Steam space volume (l) |
498 |
| Number of doors (ea.) |
2 |
| Interior dimensions |
|
| Width (mm) |
1000 |
| Height (mm) |
800 |
| Depth (mm) |
500 |
| Interior volume (l) |
400 |
| Racks (number standard/max.) |
2 / 10 |
| Load per rack (kg) |
35 |
| Permitted total load (kg) |
90 |
| Weight (empty) (kg) |
145 |
| Temperature data |
|
| Temperature range approx. 5 °C above ambient temperature to (°C) |
300 |
Temperature variation 1)
at 70 °C (± K)
at 150 °C (± K)
at 300 °C (± K) |
1
2,5
4,8 |
| Temperature fluctuation at 70 °C (± K) |
0,3 |
Warm-up time 1)
to 70 °C (min)
to 150 °C (min.)
to 250 °C (min) |
18
35
60 |
Recovery time after doors were open for 30 sec. 1)
at 70 °C (min)
at 150 °C (min)
at 300 °C (min) |
2
17
21 |
| Ventilation data |
|
Ventilation
at 70 °C (x/h)
at 150 °C (x/h)
at 300 °C (x/h) |
17
18
16 |
| Electrical data |
|
| IP protection class acc. to EN 60529 |
IP 20 |
| Voltage (± 10%) 50 / 60 Hz (V) |
400, 3 N ~ |
| Nominal power (kW) |
3,4 |
Energy consumption
at 70 °C (W)
at 150 °C (W)
at 300 °C (W) |
520
1200
2340 |
|
1)to 98% of the set value
All technical data are specified for units with standard equipment at an ambient temperature of 25 °C and a line voltage fluctuation of ±10%. The temperature data is determined in accordance to factory standard following DIN 12880, respecting the recommended wall clearances of 10% of the height, width and depth of the inner chamber. All figures are typical average values for series devices. We reserve the right to alter technical specifications at any time.
Toller Kundenservice und schnelle Beantwortung aller Fragen. Wir benötigten eine komplette Laborausstattung für unseren neuen Standort. Das Team von MedSolut hat alles zu unserer Zufriedenheit geregelt.
Kunde
There are no reviews yet.
