Buy IKA lab disc IKAMAG® pattern Online at a Good Price

Description

IKA lab disc IKAMAG pattern: for precise results in the lab.

The IKA lab disc IKAMAG pattern is a small magnetic stirrer with a single-digit stirring range. It is therefore ideally suited for use in the experimental, medical and scientific workplace. In the following, we will gladly explain the most important info about this device.

How the device works

The device comes with an internal control and a single stirring point. You can easily and precisely set the temperature range between 5 °C and 40 °C. So, in the environment, the temperature should not be outside these values.

The drive technology is a wear-free solenoid coil technology. You can perform 15 to 1500 revolutions per minute with this device. Chemical materials will not damage the housing of the model so quickly. This model also has the protection class is IP 65.

Discover the lab disc series

In addition to this one model, the manufacturer offers several other devices from this series. Depending on your needs, these could also be suitable for your application:

IKA lab disc IKAMAG stream: it has a slightly different, darker design with a blue and white surface - a very flat stirrer.
IKA lab disc IKAMAG white: This device also has a slightly different color; however, you should rather buy the pattern model.

The delivery of the IKAMAG pattern includes a 2.5 cm long stirring rod. You can also put two stainless steel or porcelain stirring plates.

In addition to the purchase of the device, the manufacturer recommends the IKA Pette Vario 1-10 ml. Feel free to contact us about this if you are interested.

Practical design and high functionality

Automatic rotation is possible every 30 seconds. This means that the rotation does not have to be performed manually and serves to optimize the mixing of your working materials such as samples. Moreover, the stirring speed can be easily controlled by the buttons via the microprocessor. You have the option to insert different flasks into the device.

The footprint consists of a round gray circle, has a diameter of 10 cm and is made of polyester. The blue knobs are each marked with the appropriate characters for use. With only four buttons to operate, the device can be used quite intuitively.

The technical features at a glance

The device does not weigh very much. At 0.3 kg, it is very light in the hand and is also easy to transport. The delivery itself weighs 1.3 kg. Furthermore, the model has a very compact size(117 mm x 12 mm x 180 mm), which allows it to fit flexibly in the workplace.

It also has a stirring volume of 0.8 liters. The required voltage of the device is between 100 and 240 volts at a frequency at 50 to 60 hertz.

Our experts answer your questions

Our team of expert consultants guarantees that you will receive the right products for your work area. Do you have any questions about our wide range of products, their benefits or our manufacturers?

We look forward to your inquiry and will be happy to help you. You can reach us by phone at +49 30 2096579 00 or by e-mail at [email protected]

Width (magnetic stirrer, agitator):	117 mm
Speed range max. (stirrer):	1500 rpm
Speed range min (stirrer):	15 rpm
Heating:	without heating
Height (magnetic stirrer, agitator):	12 mm
Material (plate):	polyester
Model of stirrer:	magnetic stirrer
Stirring positions:	one place
Stirring volume:	800 ml
Protection category:	IP 65
Controller:	internal
Temperature range:	+5°C up to +40°C (80% humidity)
Depth (magnetic stirrer, agitator):	180 mm
Shipping weight:	1,30 kg
Item weight:	0,30 kg

IKA lab disc IKAMAG® pattern

Please answer the question