Dräger gas detector X-am 5600
The Dräger X-am 5600 gas detector is a state-of-the-art multi-gas detector specifically designed to detect up to six gases simultaneously. It is ideal for use in various industrial environments, including the chemical, oil and gas, water and wastewater industries. Thanks to its robust design and advanced measurement technology, the X-am 5600 provides reliable and accurate monitoring of gases, making it a preferred choice over similar products on the market. Similar to the DOSTMANN TC309, it offers high reliability and precision.
Technical data and features
The Dräger X-am 5600 gas detector is characterized by the following technical data and features:
-
Dimensions (W × H × D): 48 x 130 x 44 mm
-
Weight: 220 - 250 g
-
Environmental conditions:
- Temperature: -20 to +50 °C; short-term down to -40 °C possible
- Pressure: 700 to 1,300 mbar
- Relative humidity: 10 to 95 % r.h.
-
Protection class: IP 67 (dust and waterproof)
-
Alarms:
- Visual: 360° alarm
- Acoustic: Multitone > 90 dB at 30 cm
- Vibration
-
Operating times: ~ 9 h or ~ 10.5 h
-
Charging times: < 4 h
-
Data memory: Readable via infrared interface, > 1,000 h with 6 gases
-
Pump mode: Max. Hose length 45 m
-
Approvals:
- ATEX: I M1 Ex da ia I Ma, II 1G Ex da ia IIC T4/T3 Ga
- IECEx: Ex da ia I Ma, Ex da ia IIC T4/T3 Ga
- CSA (Canada & USA): Class I Div. 1 Group A, B, C, D, E, F, G T.-Code T4/T3
- CE mark: Electromagnetic compatibility (Directive 2014/30/EC), ATEX (Directive 94/9/EC)
- MED: Marine Equipment Directive (Directive 2014/90/EU)
- EAC: PO Ex ia I Ma X 0Ex ia IIC T4/T3 Ga X
Areas of application
The X-am 5600 is versatile and is particularly suitable for the following applications:
-
Chemical industry: Monitoring of toxic and explosive gases in production plants.
-
Oil and gas industry: Detection of flammable gases and vapors in refineries and drilling platforms.
-
Water and wastewater industry: Monitoring of digester gases and other hazardous gases in wastewater treatment plants.
-
Mining: Use in underground mines for the detection of methane and other hazardous gases.
Certifications and standards
The Dräger X-am 5600 gas detector complies with numerous international standards and certifications that confirm its safety and reliability:
-
ATEX and IECEx: Certified for use in potentially explosive atmospheres.
-
CSA: Approved for the North American market.
-
CE mark: Complies with the European directives for electromagnetic compatibility and explosion protection.
-
MED: Approved in accordance with the Marine Equipment Directive.
-
EAC: Certified for the Eurasian market.
FAQs
How many gases can the X-am 5600 measure simultaneously?
The X-am 5600 can measure up to six different gases simultaneously.
Is the device waterproof?
Yes, the X-am 5600 is IP 67 certified and therefore dust and waterproof.
How long does it take to fully charge the device?
The charging time is less than 4 hours.
Can the device be used in potentially explosive atmospheres?
Yes, the X-am 5600 is ATEX and IECEx certified and can be used in potentially explosive atmospheres.
Conclusion
The Dräger X-am 5600 gas detector is a reliable and versatile multi-gas detector that is ideal for use in various industrial environments. With its robust design, extensive certifications and the ability to measure up to six gases simultaneously, it offers an excellent solution for gas monitoring. Similar to the DOSTMANN P705, it offers high precision and reliability, making it an excellent choice for professionals.
