Buy SIGMA 4-16KHS heated refrigerated centrifuge Online at a Good Price

Special rotor, angle rotor, swing-out rotor, MTP rotor 4-16KHS from Sigma laboratory centrifuges for fast and clean laboratory work.

The centrifuge instruments from Sigma Laboratory Centrifuges are very popular with our customers and partners. You can use the centrifuge very well for applications in clinical laboratories, for use in blood banks, for DNA research or in medical diagnostics.

Thanks to a long service life, you can also use the 4-16KHS for a large number of runs at the maximum permissible speeds. This model can be used for a wide range of applications, including all types of separation processes. Depending on which model you choose, you can count on a colorful mix of features.

The laboratory devices from Sigma laboratory centrifuges thus come with practical standard features. In addition to a lid lock and an audible alarm, the Sigma laboratory centrifuge has numerous programs which you can set via the easy-to-use display depending on the task in hand. The reliable microprocessor control ensures smooth operation and optimum control during the working process. The safety system allows you to view and correct current error messages immediately. The energy-saving ventilation also prevents the unit from overheating.

Enormous power and reliability

Centrifuge type: Universal centrifuge Dimensions (H x W x D): 489 x 570 x 650 mm Display: TFT Temperature range: -20 °C to +70 °C Frequency: 50 Hz Programs: 60 Control: Lockable control

The universal centrifuges from Sigma Laboratory Centrifuges are true all-rounders. They are suitable for routine tests and separation procedures as well as for the thorough preparation of various samples in numerous fields of application. An extensive range of pograms and rotors as well as other accessories enable you to work extremely accurately. Modern software, equipped with the latest safety standards, will not let you down. The minimal noise level ensures a calm atmosphere and optimal conditions for concentration at the workplace.

A centrifuge usually works using the so-called mass inertia and is therefore often used for substance separation. For example, gas mixtures, emulsions or suspensions can be separated.

Centrifuges with a swing-out rotor can be used primarily for analytical and semi-preparative separations.

Would you like more detailed information about the 4-16KHS?

We are your specialist for laboratory equipment! Let us advise you

Our team of expert advisors will ensure that you get the right instruments for your laboratory. Do you have questions about the different centrifuges, centrifuges with vortex function, their features or our brand manufacturers?

We look forward to hearing from you and will be happy to help! You can reach us by phone at +49 30 2096579 00 or by e-mail at [email protected].

Dimensions (H x W x D) (centrifuges):	489 x 570 x 650 mm
Acoustic signal, switchable:	yes
Display speed / g-force:	speed and g-force
Display shows dimensions:	yes
Acceleration max.:	Rotor 12130: 34 s, Rotor 12256: 110 s
Linear acceleration curves:	10
Acceleration curves, quadratic:	10
Deceleration and brakeless:	Combination from 1000 - 150 rpm selectable
Deceleration curves, linear:	10
Deceleration curves, quadratic:	10
Deceleration max.:	Rotor 12130: 34 s, Rotor 12256: 140 s
Continous run:	yes
Lid release / lid open:	Auto lid release at the end of the run, switchable, Auto lid open, switchable
Display (centrifuges):	TFT
Speed max.:	15000 rpm
Speed min.:	100 rpm
Speed increments (Centrifuges):	10; 1 rpm
Calculation for liquid density:	>1.2 g/cm3
User defined acceleration curves:	10
User defined deceleration curves:	10
Brakeless:	yes
User defined program name:	yes
Frequency (Centrifuges):	50 Hz
Capacity of vessels:	0.2 ml, 0.4 ml, 0.5 ml, 0.75 ml, 1.5 ml, 2 ml, 4 ml, 5 ml, 7 ml, 15 ml, 25 ml, 30 ml, 40 ml, 50 ml, 80 ml, 85 ml, 100 ml, 125 ml, 150 ml, 175 ml, 200 ml, 250 ml, 400 ml, 500 ml, 650 ml
Noise level at max. speed:	Rotor 11150: 60 dB (A), Rotor 12130: 63 dB (A)
Weight without rotor:	124 kg
Height with open lid:	940 mm
Capacity/capacity max.:	4 x 500 ml
Kinetic energy max.:	63897 Nm
Short run:	yes
Cooling, heating:	heating, cooling
Run monitoring:	yes
Power consumption (centrifuges):	2280 W
Max. radius decreaseable :	yes
Microprocessor controlled:	yes
Optical display stillstand:	yes
Permanent display preselected, current values:	yes
Programmes (centrifuges):	60
Rotors, pre programmed:	All rotors pre programmed speed, g-force, radius
Rotor temperature min.:	Rotor 11150 at 5,100 rpm: <4 °C, Rotor 12256 at 9,000 rpm: <4 °C, Rotor 11150 at 5,100 rpm: less than 4 °C, Rotor 12256 at 9,000 rpm: less than 4 °C
Rotor type:	special rotor, MTP rotor, angle rotor, swing-out rotor
Fast cool program:	Rapid temp
G-force increments:	10;1 xg
Safety (centrifuges):	4-digit code protection, free selectable, Start refused with exceeded temperature tolerance, tolerance preselectable, Pop up window end of rotor life time
Signal length preselectable:	yes
Voltage (centrifuges):	220 - 240 V
Start delay:	yes
Controller (Centrifuges):	Control unit lockable
Standstill heating, switchable:	yes, yes
Temperatur setting range:	-20 °C to +70 °C
Temperature increments:	1 °C
Switchable °C, °F:	yes
Time setting range:	10 sec - 99h 59min
Time increments:	60; 1 s
Timing after:	set speed has been reached, switchable
Centrifuge type:	universal centrifuge
Counting cycles:	Counting cycles centrifuge, each rotor
Shipping weight:	185,00 kg
Item weight:	124,00 kg

Model	SIGMA 4-16KHS
Power supply	220-240 V, 50 Hz
Power consumption [W]	2280
Max. capacity [ml]	4 x 500
Max. speed [rpm]	15000
Min. speed [rpm]	100
Interference suppression	EN 61326
Height x Width x Depth [mm]	489 x 570 x 650
Height with open lid [mm]	940
Weight without rotor [kg]	124
Kinetic energy max. [Nm]	63897
Noise level at max. speed (approx.) - Rotor 12130 at 13500 rpm - Rotor 11150 at 4500 rpm	63 dB (A) 60 dB (A)
Max. acceleration - Rotor 12130 [sec] - Rotor 12256 [sec]	34 110
Max. deceleration - Rotor 12130 [sec] - Rotor 12256 [sec]	34 140
Temperature setting range	-20°C - +70°C*
Min. rotor temperature - Rotor 11150 at 5.100 rpm [°C] - Rotor 12256 at 9000 rpm [°C]	<4°C <4°C

Display	TFT
Plain text pop up windows	+
Permanent display preselected, current values	+
Display shows dimensions	+
Timer	10 sec - 99h 59min
Timing after set speed has been reached, switchable	+; +
Time increments [sec]	60; 1
Short run	+
Continous run	+
Speed increments [min -1]	10; 1
Display speed and g-force	+
G-force increments [xg]	10; 1
Temperature increments [°C]	1
Switchable	°C, °F +
Standstill cooling, switchable	+, +
Standstill heating, switchable	+, +
Rapid cooling program: Rapid_temp	+
Start refused with exceeded temperature tolerance, tolerance preselectable	+
Programs	60
User defined program name	+
Program list shows all parameters	+, +
Linear acceleration curves	10
Quadratic acceleration curves	10
User defined acceleration curves	10
Linear deceleration curves	10
Quadratic deceleration curves	10
User defined deceleration curves	10
Brakeless	+
Combination deceleration a. brakeless from 1000 - 150 rpm selectable	+
Auto lid open, switchable	+; +
Accoustic signal, switchable	+; +
Signal length preselectable	+
Optical display stillstand	+
Counting cycles centrifuge, each rotor	+; +
Pop up window end of rotor life time	+
Automatic lid opening at the end of the run, switchable	+; +
All rotors pre programmed speed, g-force, radius	+
Max. radius decreaseable	+
Calculation for liquid density >1.2 g/cm3	+
Start delay	+
Controlunit lockable	+
Code protection	+
Run monitoring	+
Microprocessor controlled	+

Toller Kundenservice und schnelle Beantwortung aller Fragen. Wir benötigten eine komplette Laborausstattung für unseren neuen Standort. Das Team von MedSolut hat alles zu unserer Zufriedenheit geregelt. Kunde

There are no reviews yet.