Buy SIGMA 3-18KS universal benchtop refrigerated centrifuge Online at a Good Price

SIGMA 3-18KS benchtop refrigerated centrifuge: for efficient laboratory operation

Experience the power of the SIGMA 3-18KS benchtop centrifuge - with 18,000 rpm and freely definable acceleration curves, it is the perfect solution for your laboratory requirements! The manufacturer's 3-18KS centrifuge is a powerful device with dimensions of 355 x 630 x 600 mm. It has a extraordinary capacity. With a maximum speed range of 18,000 rpm and freely definable acceleration curves, it is the perfect solution for your laboratory requirements. The centrifuge features a protective gas connection as well as automatic lid lock during operation, which can be switched off.

The lid can also be opened automatically and can also be switched off. The TFT display gives you a clear indication of the speed and gravity field. With 10 linear and 10 quadratic acceleration curves and 10 linear and 10 quadratic braking curves, the SIGMA 3-18KS benchtop centrifuge covers stainless steel bowl imbalance, maximum flexibility, also low speeds and fine tuning. The braking curve and free run-out are selectable in combination from 1000-150 rpm. The refrigerated centrifuge enables rcf values and is also adjustable for liquids with a density greater than 1.2 g/cm3.

Smooth acceleration and innovative control

The SIGMA 3-18KS universal refrigerated table top centrifuge is equipped with an acoustic signal that can be switched off. The maximum acceleration time is 20 seconds for rotor 11132 and 28 seconds for rotor 12154. The maximum deceleration time is 12 seconds for rotor 11132 and 53 seconds for rotor 12154. The SIGMA 3-18KS is also suitable for continuous operation and offers a free program name. The frequency is 50/60 Hz.

With a vessel volume of a maximum capacity 0.2 ml to 85 ml and a kinetic energy of up to 22989 Nm, the SIGMA 3-18KS is the ideal instrument for the most demanding laboratory and research applications. With microprocessor control and a noise level of only 60 dB (A) in rotor 11132 and 66 dB (A) in rotor 12154, it is also extremely precise and quiet.

Ideal control options and flexible rotor adjustments

Thanks to its 60 pre-programmed rotors and the microcontroller controls speed, gravity field and radius, the SIGMA 3-18KS is extremely flexible and adapts to any application and comes with many biosafe configurations. Fixed angle rotors, swing-out rotors, PCR rotor, special rotor or MTP rotor - the system is ready for any task. The permanent target and actual display gives you full control of the process at all times, while the optical standstill display and run monitoring ensure maximum safety.

The SIGMA 3-18KS is not only powerful, but also extremely reliable. With a short-run function, a patented spincontrol and a maximum reducible radius, it is particularly durable and robust. Thanks to the Rapid temp. cooling program, it is also particularly flexible and adapts to any requirement. With a power consumption of 1010 W and a height of 785 mm with open lid, the SIGMA 3-18KS is the ideal unit for any laboratory.

Rely on SIGMA's high quality and decades of experience in manufacturing laboratory equipment. Get the SIGMA 3-18KS refrigerated benchtop centrifuges now and experience the broad range of power and nicely complemented flexibility you need for your research and work processes!

Questions? We will help you!

Whether research, diagnostics or analysis - the centrifuge system SIGMA 3-18KS is the perfect choice for very high requirements and demanding users - it is also suitable for low speeds. Trust in the quality of the SIGMA brand and experience the future of centrifuge technology! Do you have questions or need more product information about the versatile items, their accessories or the manufacturer? Then feel free to contact us by e-mail or phone - we will advise you at any time!

Dimensions (H x W x D) (centrifuges):	355 x 630 x 600 mm
Acoustic signal, switchable:	yes
Display speed / g-force:	speed and g-force
Acceleration max.:	Rotor 11132: 20 s, Rotor 12154: 28 s
Linear acceleration curves:	10
Acceleration curves, quadratic:	10
Deceleration and brakeless:	Combination from 1000 - 150 rpm selectable
Deceleration curves, linear:	10
Deceleration curves, quadratic:	10
Deceleration max.:	Rotor 11132: 12 s, Rotor 12154: 53 s
Continous run:	yes
Lid release / lid open:	Auto lid open, switchable, Auto lid release at the end of the run, switchable
Display (centrifuges):	TFT
Speed max.:	18000 rpm
Speed min.:	100 rpm
Speed increments (Centrifuges):	10; 1 rpm
Calculation for liquid density:	>1.2 g/cm3
User defined acceleration curves:	10
User defined deceleration curves:	10
Brakeless:	yes
User defined program name:	yes
Frequency (Centrifuges):	50/60 Hz
Capacity of vessels:	0.2 ml, 0.25 ml, 0.4 ml, 0.5 ml, 1.5 ml, 2 ml, 5 ml, 7 ml, 10 ml, 15 ml, 25 ml, 30 ml, 50 ml, 85 ml
Noise level at max. speed:	Rotor 11132: 60 dB (A), Rotor 12154: 66 dB (A)
Weight without rotor:	78 kg
Height with open lid:	785 mm
Capacity/capacity max.:	4 x 400 ml
Kinetic energy max.:	22989 Nm
Short run:	yes
Cooling, heating:	cooling
Run monitoring:	yes
Power consumption (centrifuges):	1010 W
Max. radius decreaseable :	yes
Microprocessor controlled:	yes
Optical display stillstand:	yes
Permanent display preselected, current values:	yes
Programmes (centrifuges):	60
Rotors, pre programmed:	All rotors pre programmed speed, g-force, radius
Rotor temperature min.:	Rotor 11132 at 5,500 rpm: < 4 °C, Rotor 12154 at 18,000 rpm: < 2 °C, Rotor 11132 at 5,500 rpm: less than 4 °C, Rotor 12154 at 18,000 rpm: less than 2 °C
Rotor type:	MTP rotor, angle rotor, swing-out rotor, PCR rotor, special rotor
Fast cool program:	Rapid temp
G-force increments:	10;1 xg
Safety (centrifuges):	4-digit code protection, free selectable, Start refused with exceeded temperature tolerance, tolerance preselectable, Pop up window end of rotor life time
Signal length preselectable:	yes
Voltage (centrifuges):	220 - 240 V
Start delay:	yes
Controller (Centrifuges):	Control unit lockable
Standstill heating, switchable:	yes, yes
Temperature increments:	1 °C
Switchable °C, °F:	yes
Time setting range:	10 sec - 99h 59min
Time increments:	60; 1 s
Timing after:	set speed has been reached, switchable
Centrifuge type:	universal centrifuge
Counting cycles:	Counting cycles centrifuge, each rotor
Shipping weight:	93,00 kg
Item weight:	78,00 kg

Model	SIGMA 3-18KS
Power supply	220-240 V, 50/60 Hz
Power consumption [W]	1010
Max. capacity [ml]	4 x 400
Max. speed [rpm]	18000
Min. speed [rpm]	100
Height x Width x Depth [mm]	355 x 630 x 600
Height with open lid [mm]	785
Interference suppression	EN 61326
Weight without rotor [kg]	78
Kinetic energy max. [Nm]	22989
Noise level at max. speed (approx.) - Rotor 12154 at 18.000 rpm - Rotor 11132 at 5.500 rpm	66 dB(A) 60 dB(A)
Max. acceleration [sec] - Rotor 12154 - Rotor 11132	28 20
Max. deceleration [sec] - Rotor 12154 - Rotor 11132	53 12
Temperature setting range [°C] - Rotor 11132 5.500 rpm - Rotor 12154 18.000 rpm	-10°C - +40°C < 2 < 4

Display	TFT
Plain text pop up windows	+
Permanent display preselected, current values	+
Display shows dimensions
Timer	10 sec - 99h 59min
Timing after set speed has been reached, switchable	+; +
Time increments [sec]	60; 1
Short run	+
Continous run	+
Speed increments [min -1]	10; 1
Display speed and g-force	+
G-force increments [xg]	10; 1
Temperature increments [°C]	1
Switchable	°C, °F +
Standstill cooling, switchable	+, +
Rapid cooling program: Rapid_temp	+
Start refused with exceeded temperature tolerance, tolerance preselectable	+
Programs	60
User defined program name	+
Program list shows all parameters	+, +
Linear acceleration curves	10
Quadratic acceleration curves	10
User defined acceleration curves	10
Linear deceleration curves	10
Quadratic deceleration curves	10
User defined deceleration curves	10
Brakeless	+
Combination deceleration a. brakeless from 1000 - 150 rpm selectable	+
Auto lid open, switchable	+; +
Accoustic signal, switchable	+; +
Signal length preselectable	+
Optical display stillstand	+
Counting cycles centrifuge, each rotor	+; +
Pop up window end of rotor life time	+
Automatic lid opening at the end of the run, switchable	+; +
All rotors pre programmed speed, g-force, radius	+
Max. radius decreaseable	+
Calculation for liquid density >1.2 g/cm3	+
Start delay	+
Controlunit lockable	+
Code protection	+
Run monitoring	+
Microprocessor controlled	+

Toller Kundenservice und schnelle Beantwortung aller Fragen. Wir benötigten eine komplette Laborausstattung für unseren neuen Standort. Das Team von MedSolut hat alles zu unserer Zufriedenheit geregelt. Kunde

There are no reviews yet.