Nabertherm LT 02/13 CR sintering furnace for cobalt-chrome
The Nabertherm LT 02/13 CR sintering furnace is specially designed for the heat treatment of cobalt-chrome restorations in an argon atmosphere. Thanks to its innovative design and the use of sintering beads and a special sintering bell, this sintering furnace enables sintering in an almost oxygen-free environment. This is particularly advantageous for dental laboratories and the dental sector as it increases the quality and longevity of restorations. Compared to other products, such as the Nabertherm high-temperature furnace with SiC rod heating and lifting door, the LT 02/13 CR offers specific advantages for the processing of cobalt-chrome.
Main features and advantages
The Nabertherm LT 02/13 CR sintering furnace offers a variety of features that make it an excellent choice for dental laboratories:
-
Maximum temperature: the furnace reaches a maximum temperature of 1300 °C, making it ideal for sintering cobalt-chrome restorations.
-
Sintering bell: The special sintering bell enables sintering in an argon atmosphere for up to 30 units. This reduces argon consumption and ensures even heat distribution.
-
Programmable control: The C550 controller offers the option of storing up to 10 programs with 20 segments each. This enables precise control of the sintering process.
-
Energy efficiency: The double-walled stainless steel construction keeps the external temperature of the oven low, which increases energy efficiency and improves safety.
-
Rapid cooling: The furnace can optionally be equipped with a compressed air connection for rapid cooling, which shortens process times.
Technical data
-
Maximum temperature: 1300 °C
-
Internal dimensions: 130 mm (width) x 120 mm (depth) x 120 mm (height)
-
External dimensions: 422 mm (width) x 320 mm (depth) x 430 mm (height)
-
Volume: 1.9 liters
-
Weight: 25 kg
-
Power: 2.2 kW
-
Connected load: 220 V - 240 V, 208 V, 200 V, 1/N/PE or 2/PE
-
Heating time: approx. 35 minutes to Tmax
-
Process rinsing rate: 1 liter per minute
Certifications and standards
The Nabertherm LT 02/13 CR sintering oven complies with Regulation (EC) No. 1272/2008 (CLP) and uses only non-classified insulation materials. No aluminium silicate wool is used in order to minimize potential health risks.
Application examples
The Nabertherm LT 02/13 CR sintering furnace is ideal for the following applications:
-
Dental laboratories: sintering of cobalt-chrome restorations in an argon atmosphere.
-
Dentistry: Production of durable and high-quality dental prostheses and crowns.
-
Materials research: Investigation of the properties of cobalt-chromium alloys under different sintering conditions.
FAQs
How long does the sintering process take in the Nabertherm LT 02/13 CR sintering furnace?
The heating time up to the maximum temperature of 1300 °C is approx. 35 minutes. The total duration of the sintering process depends on the specific requirements and the programmed parameters.
Can the furnace also be used for materials other than cobalt-chrome?
Yes, the Nabertherm LT 02/13 CR sintering furnace is an open system and can be used for different materials. The programmable control system allows the sintering parameters to be adapted to different materials.
What safety precautions should be observed when operating the furnace?
The furnace should be used in accordance with the operating instructions. The double-walled stainless steel construction ensures a low external temperature, and the use of unclassified insulation materials minimizes health risks.
Conclusion
The Nabertherm LT 02/13 CR sintering furnace is an excellent choice for dental laboratories and dental professionals who want to produce high-quality cobalt-chromium restorations. With its innovative technology, programmable control and the possibility of sintering in an argon atmosphere, this furnace offers numerous advantages over other models, such as the Nabertherm muffle furnace with hinged door.
| Width outside (oven): |
422 mm |
| Width inside (oven): |
130 mm |
| Height outside (oven): |
430 mm |
| Height inside (oven): |
120 mm |
| Power (oven): |
2,2 kW |
| Stove appliance type: |
sintering furnace |
| Oven volume: |
1,9 l |
| Oven temperature max.: |
1300°C |
| Depth outside (oven): |
320 mm |
| Depth inside (oven): |
120 mm |
| Shipping weight: |
30,00 kg
|
| Item weight: |
25,00 kg
|
Model
|
Tmax
°C |
Inner dimensions
W x D x H [mm] |
Volume
[l] |
Maximum
units |
Outer dimensions
W x D x H1 [mm]
|
Connected
load [kW] |
Electrical
connection2
|
Weight
[kg] |
Minutes
to Tmax4
|
| LT 02/13 CR |
1300 |
130 x 120 x 120 |
1,9 |
30 |
422 x 320 (4303) x 430 + 230 |
2,2 |
1phasig |
25 |
35 |
1 Including opened lift door
2 These furnaces are available for main voltage of 110 V - 120 V, 200 V, 208 V, 220 V - 240 V, 1/N/PE or 2/PE
3 Including compressed air connection for forced cooling
4 If connected at 230 V 1/N/PE
Toller Kundenservice und schnelle Beantwortung aller Fragen. Wir benötigten eine komplette Laborausstattung für unseren neuen Standort. Das Team von MedSolut hat alles zu unserer Zufriedenheit geregelt.
Kunde
There are no reviews yet.
