Picture similar

Julabo immersion cooler

SKU: JUL_16032
GTIN: 4064343348560
Category: Laboratory Equipment
Manufacturers: JULABO

Model

from

2.689,45 €

excl. 19% VAT , plus (Standard)

MSRP Manufacturer: 2.831,00 €

This item has variations. Please select the requested variation.

24/7 Service
Certified Consulting
Insured shipping
Buyer protection

Secure payment

Description
Reviews

This item has variations. Please select the desired variation.

Julabo immersion cooler: the versatile cooling solution for all laboratories

The Julabo immersion cooler is a cost-effective alternative to cooling with expensive tap water. This type of cooling is ideal for counter-cooling and is used in combination with heat thermostats. In addition, these effective cooling devices are used for cooling liquids to low temperatures. They are used as a substitute for dry ice.

Wide range of applications

This FT immersion cooler from Julabo is therefore excellently suited for a wide range of cooling tasks. The devices of this series are used in addition to the connection with heat thermostats or for rapid cooling of liquids, because these reach lower temperatures faster than would be possible with other methods. Thus, the devices of this series are used especially for low temperature values.

The technical specification

The air-cooled chiller has a compact design, a precise temperature sensor and replaces the conventional cooling with tap water. The lowest temperatures are -90 °C to 40 °C and -20°C. Thus, liquids can be cooled to low temperatures. The FT902 and FT402 models have integrated temperature control and display. In addition, they have Pt100 external sensors made of stainless steel with a diameter of 200 mm x 6 mm. The unit is suitable for an ambient temperature between 5 °C and 35 °C.

The cooling capacity is 0.3 kW at 20 °C. The immersion probe is flexible and the dimensions are 55 cm x 38 cm x 60 cm. The model weighs 50 kg. The possible temperature range is between -90 °C and +30 °C. The voltage should be 115 V or 230 V.

The advantages of this space-saving model

The main advantage is the possibility of cooling without tap water. Thus, an important resource can be saved. Dry ice is also costly and therefore does not need to be used. The product has a smaller footprint thanks to its design. The handling is very simple and therefore time-saving. The high-quality cooler therefore works in an environmentally friendly, user-friendly and sustainable manner, making it a cost-effective alternative to conventional cooling. The cooling method with dry ice is also expensive.

This Julabo immersion cooler works very efficiently and powerfully with considerable cooling capacity and is far less expensive than cooling units that use valuable tap water. The space-saving installation is especially practical in the laboratory area, where it is always necessary to work with many devices at the same time.

Safety information

Rapid cooling of liquids to low temperature ranges is especially important when safety is a concern. The sensors are therefore the most important components of this cooler. The DGUV V3 must therefore pay particular attention to this. As electrical work equipment, the devices are also subject to mandatory electrical testing. If the immersion coolers are used frequently, they must be subjected to the E-check every three to six months.

In addition to the immersion sensors, the temperatures, voltages are measured and the overall functionality is checked. The visual inspection of the outer shell of the unit is therefore checked, as even small dents can affect the sensitive sensors. The liquids must be in the cooler to be cooled properly. A tilted position of the unit would impair the temperature control and thus the cooling performance. Since there have been repeated accidents with dry ice in the past, this cooling method is to be welcomed. As an alternative device, the Julabo PRESTO Plus is also suitable, which convinces with further advantages!

Our MedSolut consultants answer your questions

Our team will ensure that you receive the optimal equipment for your work area. Do you have questions about the various models, their features or the respective brand manufacturers? We look forward to hearing from you and will be happy to assist you. You can reach us by phone at +49 30 2096579 00 or by e-mail at info@medsolut.com.

Operation:	cooling
Refrigeration machine:	air-cooled
Type of thermostate:	immersion cooler
Lowest temperature (cooling function):	-90°C, -40°C, -20°C

Toller Kundenservice und schnelle Beantwortung aller Fragen. Wir benötigten eine komplette Laborausstattung für unseren neuen Standort. Das Team von MedSolut hat alles zu unserer Zufriedenheit geregelt. Kunde

There are no reviews yet.

+49 30 209 657 900

MedSolut AG

info@medsolut.com