The ideal high-pressure thermostat for the workplace.
You need a thermostat for heating closed systems? That's where the products from. The Julabo Forte with its self-optimizing ICC temperature control and integrated programming leaves nothing to be desired. It can be used for scientific and medical purposes.
The main features of the thermostat Julabo Forte HT
The thermostat has electronic control. It can be used to operate closed systems at temperatures up to 400 °C. The heating power is optimal and heating is extremely fast.
You can heat production plants, reactors, distillation columns, but also autoclaves and pilot plants with this model.
The service life is high thanks to crack protection and automatic heating. Filling takes place without bubbles. Interfaces for USB connections are available. The unit is quiet and requires no major maintenance.
The three variants of the device at a glance
Julabo offers several high-temperature thermostats:
- HT30-M1: Here, the heating capacity is 3 kilowatts. As with the other two variants, the pump capacity is between 0.8 and 1.2 bar. It is also called the delivery pressure. This power can be reduced by the adapter.
- HT60-M2: In this model, the heating power is the largest. It can be up to 7 kW.
- HT60-M3: This unit has a heating power of 6 kW.
- HT-C.U. with cooling unit: This unit has a cooling unit. This can be connected to the tap water connection.
Modern, functional design
The modern-looking, 4-line LCD display facilitates operation – with a display resolution of 0.01°C. The buttons allow you to conveniently control the thermostat. Overall, the process thermostat looks very robust. In light blue color is the housing of the device.
On the top right there is a segment display with green illumination. The keys are light blue; a second display is next to it on the right, on which further data can be read. A cable connects both objects of the system.
Special functions and technologies of the device
An electronic level indicator is available for the user. During the manufacturing process, attention was paid to saving space; therefore, in addition to the location, there should be enough space on the work surface.
Due to the closed sequence of operations, the risk of oil vapors is low or non-existent. Both endothermic and exothermic reactions are reacted to quickly. The unit can be installed in miniplant systems without any problems.
At a glance: The technical data
As with any technical device, the technical details of the high-temperature thermostat are important.
The dimensions are 23 cm x 23 cm x 58 cm (width/height/depth), making it easy to transport and store in the laboratory. The device complies with all directives and standards. It has a flow rate of 14 to 18 liters per minute .
Up to two liters fit inside – this corresponds to the filling volume. If the cooling water is 20 °C warm, the cooling capacity can be up to 15 kW.
Any questions?
We will be pleased if you decide in favor of the Forte HT process thermostat. If you have any questions, simply call us at +49 30 2096579 00 or send us an e-mail at [email protected]
