IKA M 20: precise universal mill for powerful work

The IKA M 20 universal mill is a first-class device that allows dry grinding of hard and brittle substances with low losses. This is an excellent device that should not be missing in any laboratory.

This model has a particularly strong grinding mechanism and can be controlled individually. The device offers a high grinding capacity and you can even cool the contents via a powerful water cooling system. The rated speed is 20,000 revolutions per minute.

Practical design

This model comes in blue and black and offers a 250 ml interior for scientific samples that need to be ground quite finely. The grinding chambers can be cooled with water via hose nozzles.

The device has a fine grinding chamber, which can be cooled with water. The grinding chambers are removable and can be easily cleaned. The device is equipped with an M 21 beater, which is included in the scope of delivery. The grinding material can be cooled in the grinding chamber with dry ice.

The technical data at a glance

This model belongs to every scientific equipment of a laboratory and the following technical data can be found on this device. The dimensions of the device are (W x H x D) 170 mm x 350 mm x 170 mm, which makes it quite easy to integrate into any workspace and also flexible to transport. The weight is 6.6 kg. The voltage required is 230 volts at a frequency of 50/60 hertz. The device power input is 550 watts.

The motor power input is 450 watts and the motor power output is 225 watts. The speed is a constant 20,000 revolutions per minute. The useful volume is 250 ml. Beater, blade and grinding chamber are made of stainless steel. The duty cycle is 7 minutes and the off time is 10 minutes. The grinding chamber can be cooled with water. The permissible ambient temperature range is between 5 °C and 40 °C. The permissible relative humidity is 80 %.

The protection class according to DIN EN 60529 is IP 21. The grinding chamber is double-walled and thus particularly stable. Two grinding chambers can even be reliably operated alternately with the drive. The batch mill is used for low-loss, dry, fine grinding of hard and brittle substances. The grinding chamber is removable.

Discover more mills from IKA

There is a whole range of other mills from IKA. Thus, there are many other scientific mills that you can buy from this manufacturer. Particularly recommended are the mills A 10 basic, Multidrive Basic and Control as well as the A 11 Basic. With these mills, scientific samples can be reliably examined.

We will be pleased to advise you!

Our team of trained technical advisors aims to provide you with the optimum equipment for your application. Do you have any questions about our various mills, their advantages or our manufacturers?

We look forward to hearing from you and will be happy to help. You can reach us by phone at +49 30 2096579 00 or by e-mail at [email protected]

Additional information

Weight 8.6 kg
Mills Appliance type

rotor-/beater mill, Rotor-/Schlagmühle, Schneidmühle

Process type

batch