IKA analytical mill Tube Mill 100 control


  • Certified advice
  • Insured shipping up to € 25,000
  • Buyer protection
Secure payment

Secure payment

IKA Tube Mill 100 control: innovative mill for your laboratory.

The IKA Tube Mill 100 control is a worldwide innovative batch mill, which you receive with different disposable cups for grinding. As cross-contamination is eliminated , the complete cleaning effort is no longer necessary. The mill can be used to optimally grind seeds, for example.

Would you like to learn more about the device? Our team is available for you around the clock.

How the model works

This novel device is patented and for good reason. Due to the lack of cross-contamination, you no longer need to clean the device after you have used it. With this model, you now have the opportunity to use larger cups for grinding, the volume of which can be up to 100 ml.

You can use this model for dry, brittle and hard materials. Especially grinding seeds can be done with the mill, for example, wheat or corn. Since the device can only be operated when the hood is closed, your safety is always ensured.

Equipment and design

Since the cover hood as well as the cups for grinding are transparent, you have the opportunity to watch while grinding. The OLED display is available in several languages. It is clear and also displays error messages. The timer can be set between five seconds and three minutes.

The equipment also includes a USB interface, which you can use for documentation and test controls. Interval operation can be added if required. The speed can be selected continuously from 5,000 to 25,000 rpm.

In addition, various operating modes are available. The safety time and speed can be set as required.

Test conditions can be programmed and stored. The test results are reproducible. The touch keypad rounds off the mill's features. In addition to the mill, the scope of delivery also includes a grinding bowl, a USB cable and a coupling extractor.

The technical features

The peripheral speed is a maximum of 65 m/s. The usage volume is up to 100 ml. The speed can be set between 5,000 and 25,000 rpm. Its deviation is specified as plus/minus two percent.

The maximum feed hardness is five Mohs and the maximum feed particle size is 10 mm. The ground material, which is in the chamber, can be cooled with dry ice. The duty cycle is 3 minutes. A USB interface expands the mill's usage options.

Technical details at a glance

You will now get a brief overview of the other technical data that are additionally relevant for this device . We will briefly list these.

The dimensions of the mill concern the width, height and depth. They are 180 mm x 212 mm x 300 mm. So, you get a compact mill that does not require much space to be operated. Moreover, the low weight of 2.8 kg allows you to flexibly transport the device and use it wherever its services are needed.

With a power consumption of only 100 watts, the mill can be operated economically. It complies with the DIN EN 60529 standard and IP 30 protection, which means that there is protection against foreign bodies, but not against water.

We answer your questions

Our demanding team of consultants aims to ensure that you receive the ideal mills for your requirements. Do you have any questions about our wide range of products, how they work, or who makes them?

We will be happy to advise you and are available all day by phone at +49 30 2096579 00 or by e-mail at [email protected]. We look forward to getting in touch with you!

Additional information

Weight 3.8 kg
Dimensions 30 × 18 × 21.2 cm
Mills Appliance type

Analysenmühle, Analytical mill, Einweg-Mahlsystem, Schneidmühle

Process type