ELGA PURELAB flex 1
The ELGA PURELAB flex 1 from VWS Germany is a state-of-the-art ultrapure water system specially developed for demanding water treatment in laboratories and medical facilities. This system provides a reliable and efficient solution for the production of pure and demineralized water, which is essential for a wide range of applications. Thanks to its energy-efficient performance and ease of use, the PURELAB flex 1 is a preferred choice for many professionals.
Similarly equipped products such as the ELGA PURELAB Classic UVF also offer high quality water purification solutions suitable for various laboratory applications.
Technical data and features
The ELGA PURELAB flex 1 is characterized by the following technical data and features:
-
Water treatment type: ultrapure water system, pure water system
-
Capacity: 2 l/min
-
Modules: UV module to kill bacteria and germs
-
Water source: Reverse osmosis system, ion exchanger
-
Max. Flow rate: up to 2 l/min
-
Inorganic substances at 25°C: 18.2 MOhm cm
-
Bacteria (with final filter): < 1 CFU/10 ml
-
Endotoxin (with biofilter): < 0.001 EU/ml
-
Dimensions: Width 236 mm, depth 374 mm, height 900-1020 mm
-
Operating weight: 10-10.5 kg
-
Installation: Table/wall
-
Mains power consumption: 100-240 V ac, 50-60 Hz
-
Noise level: < 40 dBa
Areas of application
The ELGA PURELAB flex 1 can be used for a wide range of applications and is ideal for
-
Hospitals: For the production of germ-free water for medical applications.
-
Medical practices: For the preparation of tissue and cell cultures and reagents.
-
Industry: For the production of medicines and injection fluids.
-
Car repair shops: For special cleaning processes that require pure water.
Comparisons such as with ELGA PURELAB Classic DI show that the PURELAB flex 1 is an excellent choice for laboratories and medical facilities that require the highest water purity.
Certifications and standards
The ELGA PURELAB flex 1 complies with all relevant standards and certifications required for use in medical and industrial applications. These include, among others:
-
DIN standards: Compliance with German industry standards for water treatment systems.
-
CE marking: Conformity with European safety, health and environmental protection requirements.
FAQs
How often does the UV module need to be serviced?
The UV module should be checked regularly and replaced every 6-12 months, depending on the frequency of use, to ensure optimum performance.
Can the PURELAB flex 1 also be installed in smaller laboratories?
Yes, thanks to its compact dimensions and the option of table or wall mounting, the PURELAB flex 1 is ideal for smaller laboratories.
What water quality is recommended for the feed water source?
It is recommended to use drinking water with reverse osmosis or ion exchange pre-treatment to ensure the best water quality.
Conclusion
The ELGA PURELAB flex 1 is a powerful and reliable ultrapure water system that is ideal for use in medical and industrial applications. With its high efficiency, simple operation and comprehensive certifications, it offers an excellent solution for demanding water treatment. Similar products such as the ELGA PURELAB flex 4 also offer high-quality alternatives for specific requirements.
| Booster pump: |
without |
| Power: |
2 l/min |
| Modules: |
UV-modules |
| Storage tank - tank: |
without |
| Water treatment type: |
ultrapure water system, pure water system |
| Water source: |
from reverse osmosis system, of ion exchanger |
| Shipping weight: |
12,00 kg
|
| Item weight: |
10,00 kg
|
| model |
PURELAB flex 1 |
PURELAB flex 1
with treatment cartridge 1)
|
| Specifications Product water |
|
|
| Daily water quantity |
> 10 liters |
> 10 liters |
| Max. Flow rate |
up to 2 l/min |
up to 2 l/min |
| inorganic substances at 25°C |
as feedwater |
18,2 MOhm cm |
| organic substances (TOC) - typical |
depending on the feedwater |
depending on the feedwater |
| Directly from the integrated tank |
- |
- |
| Bacteria - typical (with final filter) |
< 1 KBE/10 ml |
< 1 KBE/10 ml |
| Bacteria - typical (with biofilters) |
< 1 KBE/10 ml |
< 1 KBE/10 ml |
| Endotoxin (with biofilters) |
- |
< 0,001 EU/ml |
| DNase (with biofilters) |
- |
- |
| RNase (with biofilters) |
- |
- |
| Dimensions and weights |
|
|
| dimensions |
width 236 mm
depth 374 mm
min. height 900 mm
max. height 1020 mm |
width 236 mm
depth 374 mm
min. height 900 mm
max. height 1020 mm |
| operating weight |
10 kg (22 lb) |
10,5 kg (23,1 lb) |
| installation |
Desk / Wall |
Desk / Wall |
| Specifications feedwater |
|
|
| source of supply |
Drinking water with subsequent treatment, preferably by reverse osmosis (RO) or ion exchanger (SDI) - filtered or distilled |
Drinking water with subsequent treatment, preferably by reverse osmosis (RO) or ion exchanger (SDI) - filtered or distilled |
| conductivity |
< 1 µS/cm 2) |
< 1 µS/cm 2) |
| ingredients |
|
|
| hardness |
- |
- |
| Free chlorine |
< 0,05 ppm Cl2
|
< 0,05 ppm Cl2
|
| chloramine |
< 0,05 ppm Cl2
|
< 0,05 ppm Cl2 |
| chlorine Total |
< 0,05 ppm Cl2 |
< 0,05 ppm Cl2 |
| silicate |
< 2 ppm |
< 2 ppm |
| carbon dioxide maximum |
< 0,1 ppm |
< 0,1 ppm |
| Fouling Index |
< 1 |
< 1 |
| Iron / manganese |
- |
- |
| organic substances (TOC) |
- |
- |
| particle |
A 0.2 micron membrane prefilters is for all feedwater systems (except reverse osmosis) is recommended for longer tool life of final filters |
A 0.2 micron membrane prefilters is for all feedwater systems (except reverse osmosis) is recommended for longer tool life of final filters |
| temperature |
4 - 40°C (recommended 10 - 25°C) |
4 - 40°C (recommended 10 - 25°C) |
| flow (at 15°C) |
< 2 l/min |
< 2 l/min |
| Runoff Specification (free expiry) |
not required |
not required |
| Feed water pressure |
|
|
| maximum |
22 psi (1,5 bar) |
22 psi (1,5 bar) |
| minimum |
minimum positive admission pressure |
minimum positive admission pressure |
| Electrical specifications |
|
|
| Mains power input |
100 - 240 V ac, 50 - 60 Hz |
100 - 240 V ac, 50 - 60 Hz |
| System voltage (without pump and UV) |
24 V dc |
24 V dc |
| Energy consumption at peak load |
120 W |
120 W |
| noise level |
< 40 dBa |
< 40 dBa |
1) must be ordered separately
2) A pretreatment cartridge at a feed water quality 1 µS / cm - 30 µS / cm necessary.
Toller Kundenservice und schnelle Beantwortung aller Fragen. Wir benötigten eine komplette Laborausstattung für unseren neuen Standort. Das Team von MedSolut hat alles zu unserer Zufriedenheit geregelt.
Kunde
There are no reviews yet.
