Dräger X-am 8000 gas detector preconfigured
The Dräger X-am 8000 pre-configured gas detector is ideal for professional use in areas such as waste water and civil engineering, chemical plants or the petrochemical industry. It detects up to seven toxic and combustible gases as well as vapors and oxygen simultaneously. Thanks to its robust design and wide range of expansion options, it is particularly durable and flexible. The [Dräger X-am 3500], which is used in comparable areas of application for the detection of hazardous substances and thus offers expansion options for a wide range of applications, has similar features.
Application areas and functions
This compact measuring device is optimized for high process reliability. Various sensor architectures ensure that flammable gases as well as oxygen and toxic substances can be reliably detected. In many industrial sectors, the "free measurement" of closed containers or duct shafts is part of everyday life. This is where the gas detector shows its strengths by accurately detecting whether hazardous substances have accumulated or whether it is possible to work safely on site.
In addition, the device supports leak detection, for example on pipelines, as it delivers precise readings even under harsh conditions. Comprehensive compliance with applicable standards is particularly important in industrial environments. This detector can be equipped with various DrägerSensors, including:
- Dual IR Ex/CO₂ for precise detection of flammable gases and carbon dioxide
- XXS sensor O₂ with reliable oxygen monitoring
- XXS sensor CO LC and H₂S LC for carbon monoxide and hydrogen sulphide measurements
In addition, the device has an optional internal pump that can be activated using a pump adapter. In this configuration, it is particularly useful for areas that are difficult to access, as sampling from tanks or shafts can be carried out easily from a few meters away.
Special features
The signaling concept with green illuminated D-Light indicates that the device has been properly tested and is ready for use. This enables an immediate comparison of the operating status - an indispensable feature for any work area where safety is paramount. The inductive charging system allows the meter to be charged wirelessly, without the need for interfering contacts to become dirty or worn. Once a pump is installed, users benefit from pre-programmed assistance functions for clearance measurement, leak detection and petrol-specific measurement (when using a PID sensor in conjunction with suitable pre-tubes).
The device is equipped with Bluetooth and therefore supports functions such as the CSE Connect system. In combination with mobile devices, this enables rapid data transfer or direct documentation. For comprehensive quality management, the scope of delivery includes the manufacturer and calibration certificate as well as a metrological report. At the same time, the gas detector uses the so-called "Toxic Twins" signal calculation to indicate critical combinations of carbon monoxide (CO) and hydrogen cyanide (HCN), which can form in certain processes.
Important technical details in brief
- Measurement of up to 7 gases simultaneously
- Internal pump (optional) with pump adapter
- Inductive charging for long-term reliability
- Supports DrägerSensor CatEx 125 PR, IR and PID sensors
- Bluetooth for digital documentation
- Multiple assistance functions for clearance measurement, leak detection and benzene-specific measurements
- Shoulder strap as standard scope of delivery
In addition to these key data, there are various configuration variants. From the basic set version, which only contains the basic device, to the preconfigured complete solution with suitable sensors and accessories for waste water or civil engineering applications, everything is possible. The preconfigured version eliminates the need for time-consuming settings during commissioning, as the alarm thresholds and sensors are already matched.
Application examples
- Waste water and civil engineering: In narrow shafts or sewers where foul gases such as hydrogen sulphide can form.
- Chemical industry: Monitoring toxic vapors such as carbon monoxide (CO) and nitrogen oxides (NO₂, SO₂).
- Petrochemicals: Detection of volatile hydrocarbons (VOC) using the optional PID sensor in the event of process leaks.
- Refineries or tanks: Clearance measurement before entering tanks to safely avoid explosive atmospheres caused by flammable gases
.
Frequently asked questions
How often does the device need to be calibrated?
As a rule, regular calibration according to the manufacturer's instructions is recommended. With preconfigured variants, the sensors are already adjusted and have preset alarm thresholds. The adjustment intervals here are usually 122 days.
Which sensors can be installed
In addition to the Dual IR Ex/CO₂ and the XXS O₂ sensor, various electrochemical (EC) sensors can be used. PID sensors can also be selected as long as they are approved for the respective device.
Can the device be used in pump or diffusion mode?
Yes, thanks to the modular design, either diffusion mode (standard) or pump mode using a pump adapter is possible.
How is the measuring device charged?
The charging process takes place in an inductive charging cradle so that mechanical connections are not affected by dirt or damage under any circumstances.
Conclusion
This gas measuring device impresses with its flexible sensor concept, the optional internal pump and the sophisticated assistance functions. This means that applications requiring free measurement can be covered just as efficiently as targeted leak detection or special petrol-specific measurements. In combination with the robust design and features such as inductive charging, the Bluetooth interface and the practice-oriented warning system, it is very well suited to a wide range of industries. Anyone looking for a reliable, versatile and easy-to-use solution for working with toxic and flammable gases will find a professional answer to almost all requirements in this measuring device.
