Picture similar

Carbolite gas-tight high-temperature drying oven HTMA up to 700 °C

SKU: CAR_6007
GTIN: 4064343057967
Category: Incubators
Manufacturers: Carbolite

Price on request

Model

This item has variations. Please select the requested variation.

24/7 Service
Certified Consulting
Insured shipping
Buyer protection

Secure payment

Carbolite gas-tight high-temperature drying oven HTMA up to 700 °C

The Carbolite gas-tight high-temperature drying oven HTMA up to 700 °C is a versatile and powerful appliance specially developed for demanding applications in research and industry. With a maximum temperature of 700 °C and a wide range of customization options, the HTMA offers outstanding performance and flexibility. Compared to similar products such as the Carbolite high temperature clean room drying oven HTCR up to 600 °C, the HTMA is characterized by its higher temperature resistance and gas-tight construction.

Technical data and properties

The Carbolite HTMA is available in various models that differ in size, performance and specific functions. Here are some of the most important technical data:

Oven type: drying oven, heating oven
Maximum temperature: 400 °C, 500 °C, 600 °C, 700 °C
Internal volume: 28 to 1000 liters
Maximum load: 11 - 50 kg
Air flow: forced
Dimensions (inside): Varies depending on model (e.g. 305 x 305 x 305 mm to 1000 x 1000 x 1000 mm)
Dimensions (outside): Varies depending on model (e.g. 990 x 810 x 885 mm to 1310 x 1530 x 1635 mm)
Maximum power: 1 kW to 15 kW

The HTMA complies with BS EN 61010-2-010:2003 and offers particularly good temperature homogeneity. This applies both to incubators with natural or fan-assisted convection and to atmospherically controlled high-temperature ovens.

Customization options

The Carbolite HTMA offers numerous customization options to meet the specific requirements of different applications. Available extras include:

Over-temperature protection
Robust shelves and pull-outs
Digital timers
Smart temperature controllers

These customization options make the HTMA an extremely flexible appliance that can be used in a variety of environments.

Areas of application

The Carbolite HTMA is ideal for a wide range of applications in research and industry. Typical areas of use include:

Tempering/stress relief annealing: the HTMA is ideal for tempering and stress relief annealing of metals to improve their mechanical properties.
Drying/moisture extraction: The drying oven can be used to remove moisture from various materials, which is of great importance in materials research and development.
Paint drying: The HTMA is also suitable for drying paints and coatings, making it a valuable tool in surface treatment.

Certifications and standards

The Carbolite HTMA complies with the BS EN 61010-2-010:2003 standard, ensuring its safety and reliability in demanding applications. This certification ensures that the drying oven meets the highest standards and can be used safely in a variety of environments.

FAQs

What power connection configurations are available for the HTMA?

All models of the HTMA can be operated with a 220-240 V, 16 A single-phase connection. Other power connection configurations are available on request.

How long does it take for the HTMA to heat up?

The heat-up time varies depending on the model and maximum temperature. For example, the heat-up time for the HTMA 7/28 model (700 °C) is around 90 minutes.

What safety functions does the HTMA offer?

The HTMA is equipped with overtemperature protection, which protects the appliance from overheating and ensures safe operation.

Conclusion

The Carbolite gas-tight high-temperature drying oven HTMA up to 700 °C is a versatile and powerful appliance that is ideal for demanding applications in research and industry. With its high temperature resistance, excellent temperature homogeneity and numerous customization options, the HTMA offers outstanding performance and flexibility. Similar products such as the Carbolite HT high temperature drying oven up to 700 °C also offer high temperatures, but without the gas-tight construction of the HTMA.

Load max.:	11 - 50 kg
Width outside (incubators,...):	810 mm, 860 mm, 1015 mm, 1065 mm, 1115 mm, 1165 mm, 1215 mm, 1530 mm
Width inside (incubators,...):	305 mm, 455 mm, 610 mm, 800 mm, 1000 mm
Maximum temperature (heat):	+ 400 °C, + 500 °C, + 600 °C, + 700 °C
Height outside (incubators,...):	990 mm, 1085 mm, 1120 mm, 1145 mm, 1270 mm, 1295 mm, 1305 mm, 1310 mm
Height inside (incubators,...):	305 mm, 455 mm, 610 mm, 800 mm, 1000 mm
Interior volume:	up to 50 l, 51 - 100 l, 201 - 300 l, 401 - 500 l, 901 - 1000 l
Maximum power:	1 kW, 2 kW, 3 kW, 4 kW, 4.5 kW, 6 kW, 7.5 kW, 9 kW, 10 kW, 12 kW, 15 kW
Air convestion (incubators, ...):	forced
Suitable for:	Starting/low-voltage annealing, Lacquer drying, Drying / moisture extraction
Cabinet type:	heating oven, Heating cabinet
Depth outside (incubators,...):	885 mm, 890 mm, 1120 mm, 1280 mm, 1450 mm, 1635 mm
Depth inside (incubators,...):	305 mm, 455 mm, 610 mm, 800 mm, 1000 mm

Carbolite High temperature Drying oven HTMA	Maximum temperature (°C)	Heating time (minutes)	Recovery- Time (minutes)	Dimensions Inside H x W x D (mm)	Dimensions Outside H x W x D (mm)	Perforated sheets inclusive/ maximum	Maximum load per perforated plate/ total (kg)	Chamber- Volume (litres)	Maximum power (W)	Weight (kg)
HTMA 4/28	400	60	10	305 x 305 x 305	990 x 810 x 885	2/2	10/20	28	1000	73
HTMA 4/95	400	75	16	455 x 455 x 455	1120 x 1015 x 1120	3/4	15/30	94	3000	99
HTMA 4/220	400	120	20	610 x 610 x 610	1270 x 1165 x 1280	3/4	25/50	227	4000	179
HTMA 4/500	400	-	-	800 x 800 x 800	1305 x 1115 x 1450	3/5	-/-	500	7500	-
HTMA 4/1000	400	-	-	1000 x 1000 x 1000	1310 x 1530 x 1635	3/5	-/-	1000	12000	-
HTMA 5/28	500	60	10	305 x 305 x 305	990 x 810 x 885	2/2	10/20	28	2000	73
HTMA 5/95	500	75	16	455 x 455 x 455	1120 x 1015 x 1120	3/4	15/30	94	4500	99
HTMA 5/220	500	120	20	610 x 610 x 610	1270 x 1165 x 1280	3/4	25/50	227	6000	179
HTMA 5/500	500	-	-	800 x 800 x 800	1305 x 1115 x 1450	3/5	-/-	500	9000	-
HTMA 5/1000	500	-	-	1000 x 1000 x 1000	1310 x 1530 x 1635	3/5	-/-	1000	15000	-
HTMA 6/28	600	60*	10*	305 x 305 x 305	990 x 810 x 885	2/2	10/20	28	2000	73
HTMA 6/95	600	75*	16*	455 x 455 x 455	1120 x 1015 x 1120	3/4	15/30	94	4500	99
HTMA 6/220	600	120*	20	610 x 610 x 610	1270 x 1165 x 1280	3/4	25/50	227	9000	179
HTMA 6/500	600	-	-	800 x 800 x 800	1305 x 1115 x 1450	3/5	-/-	500	12000	-
HTMA 6/1000	600	-	-	1000 x 1000 x 1000	1310 x 1530 x 1635	3/5	-/-	1000	15000	-
HTMA 7/28	700	90	24	305 x 305 x 305	1085 x 860 x 890	2/2	8/16	28	3000	85
HTMA 7/95	700	95	24	455 x 455 x 455	1145 x 1065 x 1120	3/4	10/30	94	6000	115
HTMA 7/220	700	120	24	610 x 610 x 610	1295 x 1215 x 1280	3/4	15/45	227	10000	195

Please note:
The minimum working temperature is about 60 °C above room temperature.
Temperature homogeneity measured in empty and closed chamber after a stabilisation phase
Maximum output and heating time with 240 V connection
Outer dimensions with closed door
* Nominal value based on representative samples

All models can be operated with a 220-240 V, 16 A single-phase connection.
Other power connection configurations available on request.

Toller Kundenservice und schnelle Beantwortung aller Fragen. Wir benötigten eine komplette Laborausstattung für unseren neuen Standort. Das Team von MedSolut hat alles zu unserer Zufriedenheit geregelt. Kunde

There are no reviews yet.

Information on product safety

Manufacturer information:

Carbolite Gero GmbH & Co. KG
Hesselbachstraße 15
75242 Neuhausen, Deutschland
sales@carbolite-gero.de

Responsible person:

Sebastian Schuldt
030 209 657 900
info@medsolut.com