BioSan MMS-3000 with stand for reliable applications.
The BioSan MMS-3000 with stand magnetic stirrer is ideal for use in the laboratory for dialysis, extraction and pH measurement for small amounts of substances. The device features a very high speed and is made of high-quality, durable materials. Do you have additional questions? Our team is ready to help you.
The most important features summarized
The magnetic stirrer is suitable for use in the laboratory. You can use it to perform various applications, for example, pH measurement and more. It is a compact device whose working surface is made of high-quality stainless steel .
It can be used for stirring various liquids. At the same time, the magnetic element works at a maximum rotation speed of 3,000 rpm. No other manufacturer has yet managed to develop such a high-quality device in combination with such a speed.
The element is held in place by powerful magnets . Stirring is possible without generating disturbing noise or undesirable heating.
Modern design and practical handling
The unit includes a 6 x 25 ml magnetic stir bar as standard, which is cylindrically shaped and intended for general use. This is embedded in PTFE. The equipment also includes a stand that can be removed. It is suitable for different sensors, for example pH measurements or temperatures. These are located inside and come into contact with the liquids.
The device can be used in incubators and cold rooms. The operating temperature is between +4 °C and +40 °C. Furthermore, the relative humidity is 80 percent. The model is white and has a transparent container, which allows to have a look at the liquid at any time. In the lower front area is the on/off switch in red. Next to it is the regulator that allows you to set the desired speed.
The speed setting range is specified as 0 to 3,000 rpm. The stirring volume of the liquids is up to 20 liters. The maximum length of the stirring rod is 70 mm. The manufacturer specifies a maximum stirring liquid viscosity of 1,170 mPa.s. Continuous operation of the model is possible up to 24 hours.
The size of the working plate has a diameter of 160 mm. The plate material is made of durable stainless steel. The stand can be attached to the device. It has a diameter of 8 x 320 mm.
Other technical details
The dimensions of the device are 185 mm x 230 mm x 75 mm in width, depth and height. This makes it small, compact and handy to use. In addition, the fast device weighs only 1.5 kg. This allows you to transport it easily and flexibly, as it can be used anywhere. Another advantage is the very low energy consumption of 3 watts and thus the economical use.
Our experts are ready to answer your questions!
Our team of top-notch service staff will make sure you get the best products for your application. Do you have any questions about our different designs, their features or our manufacturers?
We will be happy to assist you and are available every day by phone at +49 30 2096579 00 or by e-mail at [email protected]. We look forward to your contact!