BioSan Laboratory Centrifuge LMC-3000


  • Certified advice
  • Insured shipping up to € 25,000
  • Buyer protection
Secure payment

Secure payment

The LMC-3000 from BioSan: For efficient laboratory work.

The BioSan LMC-3000 is a modern benchtop centrifuge that can rotate microassay plates and centrifuge tubes of up to 50 ml at low speed. Such a device is often used in appropriate laboratories with a biochemical profile.

Quiet operation, efficient results

The device starts smoothly and slowly swings out with the rotor. The centrifugation parameters can be set in a user-friendly way and the set and actual values can be displayed simultaneously.

Operation is always reliable and safe at any speed due to a metal protection chamber and a cover with automatic stop in case of imbalance and appropriate latches, which keeps the lid closed during operation from a centrifuge.

An advantage of this device is the low noise level. You can choose a rotor for operation as you wish. The rotor speed can be set in RPM or RCF.

Multiple acceleration can be selected in slow, normal and fast. Deceleration can also be selected in 0, slow, normal and fast.

Also, the forced braking can be turned off. You have a wide choice of accessory rotors.

Modern, functional design

The design of the device is in plain white and on the front there is a display with an input field with 6 buttons, for configuring the device. A lid covers the samples for the centrifuge.

With this model, operation with micro test plates can be guaranteed. 50 ml tubes can be used. Operation at any speed is safely possible.

The lid during operation is closed. User-friendly setting of centrifugation parameters is possible via the keypad.

Technical data at a glance

The device dimensions for this model are 420 mm x 495 mm x 235 mm. The weight is 11.8 kg. The speed setting range of the centrifuge tubes is between 100 and 3,000 rpm. The speed setting range of the microtiter plates is between 100 and 2,000 rpm.

The setting resolution is 100 rpm. The digital time setting is between 1 and 90 minutes. There is a timer sound signal.

Diagnosed imbalance of the rotors and can cause an automatic stop. The display consists of an LCD with 16 x 2 characters. The chamber diameter is 335 mm.

The nominal operating voltage is 230 volts at 50/60 hertz or 120 volts at 50/60 hertz. Power consumption is 110 watts at 0.5 amps and 120 watts at 1 amp. This centrifuge is an important tool in daily laboratory use – it should not be missing in any laboratory.

Blood samples can be reliably analyzed with such a device. The rotor type is equipped with movable buckets. The device is also designed for low speeds. You can work reliably and efficiently with this at any time.

Our experts are ready to answer your questions!

Our expert service team will ensure that you receive the optimal items for your laboratory. Do you have any questions about the various articles, their properties or our manufacturers?

We look forward to hearing from you and will be happy to advise you. You can reach us by phone at +49 30 2096579 00 or by e-mail at [email protected]

Additional information

Weight 15.3 kg
Rotor type

Ausschwingrotor, MTP rotor, MTP-Rotor, Spezialrotor

Capacity of vessels

10 ml, 15 ml, 50 ml

Speed min.

100 rpm

Model of centrifuge

Kleinzentrifuge, small centrifuge

Speed max.

3000 rpm

Dimensions (H x W x D) (centrifuges)

235 x 495 x 410 mm

Display (Centrifuges)

LCD, 2 x 16 signs, LCD, 2 x 16 Zeichen

Speed range (centrifuges)

100 – 2000 rpm, 100 – 3000 rpm

Speed increments (Centrifuges)

100 rpm

Frequency (Centrifuges)

50/60 Hz

Weight approx. (centrifuges)

11,8 kg, 11.8 kg

Chamber diameter (centrifuges)

335 mm

Power consumption (centrifuges)

110 W, 120 W

Safety (Centrifuges)

Rotor imbalance diagnostics: automatic stop, IMBALANCE warning, Rotor-Ungleichgewichtsanalyse (automatischer Stop, IMBALANCE Warnung)

Voltage (Centrifuges)

120 V, 230 V

Time setting range

1 – 90 Min

Time increments

60 s